I thought about this one for a while. First I thought I would make an explosion card with cribs, but too expensive. So to simplify things I thought diaper!
I Googled "diaper card template" and found numerous templates to make diaper cards with. There was so much to choose from and the inspirations were great. After seeing what was available, I set out to make my card.
I started with Whisper White CS and cut out the basic diaper shape. Then using a blue ginham and pink polka-dot DSP that I had I adhered them using sticky strip to the diaper base down the middle, leaving the legs open.
Then with plain CS in the corresponding colours I punched out a scalloped edge for the one side and a diamond edge for the other. After punching these out I ran them through my crimper several times to break the fibers to allow them to be more easily applied to the diaper. Again with sticky strip I adhered these crimped pieces inside the two layers of the cardstock.
Next was my inside. I searched for a greeting that would be appropriate for Twins, but couldn't find anything I liked to I decided to try it on my own. I printed this out on regular paper and adhered it to the inside of the card. This is what I came up with. Then I added the little hand and foot prints to the inside of the base.
I was very pleased with the outcome and I'm sure that the Mommy-to-Be will be happy with it too (or should I say Two!)
Thanks for dropping by.
Your comments mean a lot to me, so please remember to leave one!